How do I enrol a new sensor?

Click on the enrol button to on-board a new sensor.

The first step is to assign a device profile. You can select an existing device profile or create a new one. If you decide to create a new device profile a name is required. For your convenience, the system retains the configuration of all set device profiles to allow the user to use the set device profile if necessary when onboarding the next sensors.

After setting up the device profile, you can enrol the sensor. Choose between single or bulk sensor enrolment if you have multiple sensors of the same type you want to onboard at once.

For every sensor, you need to enter the specific Device EUI, the Application key, and a sensor label with which you can recognise the sensor.

If you are using bulk enrolment you can enter these parameters line-by-line in the form DevEUI|AppKey|Sensor Label. To separate the parameters the pipe-symbol “|” is used. For a large amount of sensors, you can the API. (word is missing)

After entering all the parameters, click continue. An overview will be shown. Once you are satisfied with the data output, click done. (Delete)

A check will be done, if any errors occur during the onboarding process, an error message (delete) will be displayed.